To properly install hardwood flooring, there are several things you should do before you begin the installation process. If you live in an area that is not conditioned, you will need to add a vapor retarder to the sub-floor before you install the hardwood floor. It should be compatible with the adhesive you plan to use and should be applied as directed. When installing hardwood flooring, you will need to allow for expansion space. Visit our website to get free information about Metro Floor Coverings-Flooring Contractors Charlotte .
Professional certification is one of the most important things to look for in a hardwood flooring installation company. It will show that a company is serious about their work and is committed to keeping up with current trends in the flooring industry. This will help clients trust the installers’ work and make the overall experience a pleasant one. After all, no one wants to hire a substandard hardwood flooring installation service. A flooring installation company will have the training and tools to get the job done right the first time.
Hardwood flooring is best installed perpendicular to floor joists. The installation process requires a minimum of five percent culling allowance, and manufacturers recommend up to 10 percent for diagonal surfaces. Before installing hardwood flooring, acclimatize it in a room for at least five days. The recommended room temperature is sixty-five degrees Fahrenheit and the humidity level is thirty to 55 percent. If you have a large area to cover, consider buying a case of hardwood flooring in full.
When selecting a hardwood flooring installer, check to see that the sub-floors are clean and flat. Make sure the installer is National Wood Flooring Certified. Incorrect sub-floor surfaces can result in a quality installation failure. If you are in doubt, the National Wood Flooring Association recommends hiring a certified professional installer. And don’t forget to check the sub-floor: it must be clean, dry, and structurally sound.
Before you start installing hardwood flooring, remember that it is important to choose the right grade. Oak wood, for example, has distinctive characteristics. No two boards will be the same. This is normal, and some boards will have more natural color variations than others. Avoid placing hardwood floors in direct sunlight if possible, and keep them well-ventilated to reduce any color changes. Also, look for cracks between floorboards. Wood floors often expand and contract during the change of seasons and between high and low humidity. A good way to judge whether your floor is ready for installation is to stand on it and inspect it from a standing position.
The first row of hardwoods should be straight because every subsequent row will be laid relative to it. If it is not, you will be left with big curves as you go along. Also, remember that exterior walls are not square, so make sure to lay hardwoods perpendicular to the joists. You can use a guide to determine the approximate cost of your project. Also, it is a good idea to use a flooring tool rental company so that you don’t have to worry about storing and maintaining the tools.